$1295.00

MECHANICAL SPECIFICATIONS

• Can Be Installed Two Ways: Open Inside Close Outside Or Open Outside Close Inside.
• Capabilities: Max Gate Size 15' Wide, 600 Lbs.
• Travel Speed: 14 to 18 Seconds 90-degree Opening.
• Dimensions: L 39 1/2" X W 3 1/2" X H 4".
• Operation Cycles: 100 Cycles/day
• Torque: 600 Lbs. Of Torque.
• Shipping Weight: 58 Lbs.
• Motor: 24V DC, 12 Amp
• Finishing: Aluminum
• Output Shaft: 1" Shaft

• Running System: Microcontroller With Built-in Watchdog System.
• Modular Board: Uses Leds To Indicate All Input And Output Functions.
• Erd Sensor: If The Gate Hits A Vehicle While Opening, It Will Reverse A Few Inches And Stops. If The Gate Hits A Vehicle While Closing, It Will Reopen.
• Timer: Can Be Set From 3 To 60 Seconds, Or "push-open/stop/close" Operation.
• Master/slave: Dictates Synchronized Movement Between Two Gate Operators.
• Safety Loop Input: Anti-tailgating System Uses A "stop Only" Method Of Operation. This Input Will Not Work As A Commercial Loop System.
• Alarm Output: Can Be Interfaced With Any Home Alarm System. Alarm Will Sound If The Gate Is Forced Open. Optional Siren Can Be Installed.
• Spike Suppressors: System Is Protected By Spike Suppressors.
• Alternate Outputs: Sensors Alarm, Alarm System, And Magnetic Locks.
• Electronic Inputs: Any Type Of Radio Receiver, Full-control System "push-open/stop/close", Safety Loop, Photocell, Telephone Entry, And Key Switch.
• Control Board Housing Dim.: Length 10.5" - Width 4.25" - Height 12"
• Housing Finish: Entire Housing Is Polyethylene plastic