AeGIS 4000
Single Line " Non Subscriber" Telephone Access Control Systems

Features

  $799.00

  • Hands Free Single Phone Line “ Non Subscriber” Telephone Entry Access System.

  • Uses existing phone line or dedicated phone line (two systems   
    can be installed).

  • Optional Radio Receiver.

  • Programming local via built-in keypad or remote via a touch tone phone.

  • Remote Access press 9 to unlock door 1 or press 8 to unlock door 2 or optional Radio Transmitter

  • Local Access keypad entry code (50 programmable codes).

  • Distinctive Ringing.

  • Call Waiting.

  • Automatic and Manual Call Forwarding to call a secondary phone number.

  • Built Auxiliary Input for radio frequency receiver, timer, free exit switch, panic bar, etc.

  • Recess Keypad w/ Built-in night light.

  • Brushed Stainless Steel

  • Plating Faceplate. Outdoor or Indoor.

  • Surface Mount. Outdoor or Indoor.

specifications
Power Input: 12VAC 40VA UL Listed Transformer (supplied) 
or 12VDC 40VA (output reading must be 13.5 - 14.5 VDC).
Current Consumption: 420 mA idle, 620 mA operating.
Emergency Battery: 12 VDC 4 Ahr rechargeable 
battery with 12 VDC charger (not supplied).
Operating Environment: 0°F to 140°F 
Relative Humidity 0 % - 95 % noncondensing.
Relay: Two built in relays. Form C Dry Contact 120 VAC 10A, 24VDC 10A or 250VAC 7A. Programmable output 01-90 seconds. 
Works behind an analog PBX to call extensions.
Dialing: Tone.		 Memory Type: EEPROM (non-volatile).
Programmable Talk Time.
Standard Programming: Via Built-in Keypad or Touch-Tone Phone.
Incoming touch-tones through the microphone are ignored by the system.
Construction: 16 Gauge Cold Rolled Steel back box with enamel finished and Brushed Stainless Steel Faceplate.
Dimensions : 9-1/8” (H) x 6-15/16”(W) x 3-7/8”(D).
Shipping Weight: 8 Lbs. approximate.
“TWO YEARS WARRANTY” includes lightning and power surge if Pach and Company surge protector (ASP1) is installed).