TYPE
Vehicular Slide Gate Operator

CLASS OF OPERATION
Class IV 110-120 VAC, 60 HZ, Single Phase
220-240 VAC, 60 HZ, Single Phase
200-208 VAC, 60 HZ, Three Phase
220-240 VAC, 60 HZ, Three Phase
440-480 VAC, 60 HZ, Three Phase

CURRENT DRAW
14.0 Amp @ 115 VAC Single Phase
7.0 Amp @ 230 VAC Single Phase
4.0 Amp @ 200 VAC Three Phase
3.6 Amp @ 230 VAC Three Phase
1.8 Amp @ 460 VAC Three Phase

MOTOR
1 HP 60 cycles / hr.

MAXIMUM GATE WEIGHT
3000 lb. (1357 kg.)

MAXIMUM GATE LENGTH
100 ft. (30.5 m)

OPERATING TEMPERATURE
-140ºF - 145ºF (-40ºC - 62ºC)

SPEED
Approximately 1 ft. (.3 m) / sec.

CHAIN
#60 Roller Chain Standard

ENTRAPMENT PROTECTION
Primary - Inherent (Type A)
Secondary - Provision for:
contact sensor (Type B1) and non-contact sensor (Type B2)

GATE RELEASE
Fail Secure Only - Crank Release

DIMENSIONS
Height: 34 in. (850 mm)
Width: 16 in. (400 mm)
Depth: 16 in. (400 mm)

WEIGHT
Approximately 260 lb. (120 kg.).

LISTINGS
ETL Listed

NOTE: Use of this product is limited to vehicular slide gates only.  This product must never be used to operate any gate that is intended for pedestrian use.
Model 920
FEATURES
  • Electronic, automatically adjusted limit settings (no mechanical limit switches required).
  • Mechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
  • Automatic close timer is adjustable from 1 to 23 seconds.
  • Two ports for plug-in loop detectors.
  • Two 110 volt convenience outlets.
  • Built-in reset switch.
  • Partial open feature opens gate to 14 ft (4.3 m)
  • Special Anti-Tailgate loop function helps prevent vehicles from gaining entry by tailgating.
  • Gate Tracker™ reporting feature sends gate operator data to a companion DoorKing access control system.