TYPE
Vehicular Slide Gate Operator

CLASS OF OPERATION
Class I, II, III, IV

INPUT POWER
110-120 VAC, 60 HZ, Single Phase
5.4 Amp @ 115 VAC

MOTOR
1/2 HP 60 cycles / hr.

MAXIMUM GATE WEIGHT
1000 lb. (453 kg.)

MAXIMUM GATE LENGTH
30 ft. (9.2 m)

OPERATING TEMPERATURE
-140ºF - 145ºF (-40ºC - 62ºC)

SPEED
Approximately 1 ft. (.3 m) / sec.

CHAIN
#41 Roller Chain Standard
#40 Roller Chain Optional

ENTRAPMENT PROTECTION
Primary - Inherent (Type A)
Secondary - Provision for:
contact sensor (Type B1) and non-contact sensor (Type B2)

GATE RELEASE
Fail Safe - Standard
Fail Secure - Optional Factory Install

DIMENSIONS
Height: 24 in. (600 mm)
Width: 12 in. (300 mm)
Depth: 11.5 in. (287.5 mm)

WEIGHT
Approximately 85 lb. (38.5 kg.)

LISTINGS
ETL Listed

NOTE: Use of this product is limited to vehicular slide gates only.  This product must never be used to operate any gate that is intended for pedestrian use.
Click the image to download model 9100 Spec Sheet in PDF format.  If you do not have Acrobat Reader 4.0 or higher, click on the Acrobat icon to get a free copy.
FEATURES
bulletElectronic, automatically adjusted limit settings (no mechanical limit switches required).
bulletMechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
bulletAutomatic close timer is adjustable from 1 to 23 seconds.
bulletTwo ports for plug-in loop detectors.
bulletTwo 110 volt convenience outlets.
bulletBuilt-in reset switch.
bulletPartial open feature opens gate to 14 ft (4.3 m)
bulletSpecial Anti-Tailgate loop function helps prevent vehicles from gaining entry by tailgating.
bulletGate Tracker™ reporting feature sends gate operator data to a companion DoorKing access control system.