TYPE
Vehicular Slide Gate Operator

CLASS OF OPERATION
Class I, II

INPUT POWER
110-120 VAC, 60 HZ, Single Phase
5.4 Amp @ 115 VAC

MOTOR
1/2 HP 60 cycles / hr.

MAXIMUM GATE WEIGHT
500 lb. (226 kg.)

MAXIMUM GATE LENGTH
22 ft. (6.7 m)

OPERATING TEMPERATURE
-140ºF - 145ºF (-40ºC - 62ºC)

SPEED
Approximately 1 ft. (.3 m) / sec.

CHAIN
#41 Roller Chain

ENTRAPMENT PROTECTION
Primary - Inherent (Type A)
Secondary - Provision for:
contact sensor (Type B1) and non-contact sensor (Type B2)

GATE RELEASE
Fail Safe - Standard
Fail Secure - Optional Factory Install

DIMENSIONS
Height: 22.5 in. (562.5 mm)
Width: 12 in. (300 mm)
Depth: 11.5 in. (287.5 mm)

WEIGHT
Approximately 66 lb. (29.9 kg.)

LISTINGS
ETL Listed

NOTE: Use of this product is limited to vehicular slide gates only.  This product must never be used to operate any gate that is intended for pedestrian use.
Model 907
FEATURES
  • Electronic, automatically adjusted limit settings (no mechanical limit switches required).
  • Mechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
  • Automatic close timer is adjustable from 1 to 23 seconds.
  • Two ports for plug-in loop detectors.
  • Two 110 volt convenience outlets.
  • Built-in reset switch.