TYPE
Vehicular Slide Gate Operator

CLASS OF OPERATION
Class I INPUT POWER
110-120 VAC, 60 HZ, Single Phase
4.3 Amp @ 115 VAC (typical)

MOTOR
1/3 HP Intermittent duty cycle

MAXIMUM GATE WEIGHT
300 lb. (136 kg.)

MAXIMUM GATE LENGTH
16 ft. (4.9 m)

OPERATING TEMPERATURE
-140ºF - 145ºF (-40ºC - 62ºC)

SPEED
Approximately 1 ft. (.3 m) / sec.

CHAIN
#41 Roller Chain

ENTRAPMENT PROTECTION
Primary - Inherent (Type A)
Secondary - Provision for:
contact sensor (Type B1) and non-contact sensor (Type B2)


GATE RELEASE
Fail Safe - Standard
Fail Secure - Optional Factory Install

DIMENSIONS
Height: 22.5 in. (562.5 mm)
Width: 12 in. (300 mm)
Depth: 11.5 in. (287.5 mm)

WEIGHT
Approximately 66 lb. (29.9 kg.)

LISTINGS
ETL Listed

NOTE: Use of this product is limited to vehicular slide gates only.  This product must never be used to operate any gate that is intended for pedestrian use.
Model 905
FEATURES
bulletElectronic, automatically adjusted limit settings (no mechanical limit switches required).
bulletMechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
bulletAutomatic close timer is adjustable from 1 to 23 seconds.
bulletTwo ports for plug-in loop detectors.
bulletTwo 110 volt convenience outlets.
bulletBuilt-in reset switch.