TYPE
Vehicular Swing Gate Actuator

CLASS OF OPERATION
Class I and II 110-120 VAC, 60 HZ, Single Phase
3 Amp @ 115 VAC (typical)

MOTOR
1400 RPM Intermittent duty cycle

MAXIMUM GATE WEIGHT
Model 601 - 400 lb. (181 kg.)
Model 602 - 500 lb. (226 kg.)

MAXIMUM GATE LENGTH
Model 601 - 10 ft. (3.0 m)
Model 602 - 13 ft. (4.0 m)

OPERATING TEMPERATURE
-140ºF - 145ºF (-40ºC - 62ºC)

SPEED
90º in approximately 10 seconds

ENTRAPMENT PROTECTION
Primary - Inherent (Type A)
Secondary - Provision for:
non-contact sensor (Type B2)

GATE RELEASE
Fail Secure - Keyed release.

DIMENSIONS
Length Model 601: 28 in. (700 mm)
40 in. (1000 mm) extended

Length Model 602: 32.5 in (812 mm)
48.5 in (1212 mm) extended

Width: 4 in. (100 mm)
Height: 3.5 in. (87.5 mm)

WEIGHT
Actuator 20 lb. (9 kg.)
Control Box 14 lb. (6.3 kg.)

NOTE: Use of this product is limited to vehicular swing gates only.  This product must never be used to operate any gate that is intended for pedestrian use.

Model 601 / 602
FEATURES
bulletElectronic, automatically adjusted limit settings (no mechanical limit switches required).
bulletElectronic inherent entrapment sensing system operable in both the open and close direction.
bulletAutomatic close timer is adjustable from 1 to 23 seconds.
bulletTwo ports for plug-in loop detectors.
bulletGate overlap feature starts the master operator 1-2 seconds prior to the slave operator.
bulletMagnetic lock output provided for direct connection of mag locks to the circuit board.
bulletTamper protect feature causes motor to run in the close direction if an attempt is made to force the gate open.
bulletGate Tracker™ reporting output sends gate operator data to a companion DoorKing access control system.